In view of the increasing incidence of automotive spare parts counterfeiting CLEPA, the European umbrella organization of the automotive supplier industry, recommends that all spare parts be marked with Data Matrix codes. By integrating these codes with the KeySecure system Schreiner ProSecure enables reliable proof of authenticity.
With KeySecure, Schreiner ProSecure offers automotive spare parts manufacturers a complete marking system for reliable authentication along the entire distribution chain. The system can be superbly integrated with existing infrastructures.
The KeySecure code is a 15-digit alphanumerical sequence which is as unique as a fingerprint so that every single component is provided with an individual identifier.
When the Data Matrix code is read by a scanner it can be immediately verified via an online portal such as www.tecidentify.com in a one-step identification/authentication process. Alternatively, the code can be easily and quickly authenticated by manually entering it as cleartext numbers on an internet portal.

You'd like to inform yourself about ways to integrate product protection and security into your supply and logistics chain? Then visit PASS, the "1st Product Authentication and Security Summit," in New Brunswick, New Jersey, on September 14 and 15, 2010. Schreiner ProSecure will be represented with a booth there as well. Further information is available at www.product-authentication.com.

As a renowned provider of debit card terminals for retail stores and cash register systems, REA Card GmbH takes security very seriously. Therefore, the company equips all of its terminals with the Schreiner ProSecure housing seal.
In an attempt to detach the seal, a previously hidden pattern will indicate the tampering attempt. Any application of stronger force will visibly damage the seal. The use of solvents or heat is reliably indicated as well. In addition, the embossed hologram offers protection from copying and counterfeiting. A Data Matrix code personalizes each seal so that a check will immediately show if the seal has been exchanged.
On September 21, 2010 an industry working group focused on comprehensive protection systems against product piracy will convene at the Institute for Materials Handling, Materials Flow and Logistics of the Technical University Munich. If you are interested in attending and discussing this topic with academics and professionals from the field you can find further information at www.proauthent.de.
Schreiner ProSecure has been a member of the ProAuthent alliance for three years – together with leading industrial corporations and three departments of TU Munich. The research project is centered on developing suitable identification and authentication technologies and an IT-based system for product tracking and tracing. The aim is to prevent pirated goods from infiltrating into the supply chain and counterfeit components being knowingly or unknowingly taken into operation.
About two thirds of all machinery and equipment manufacturers are affected by product piracy. A new video by the VDMA entitled “Stand up against product piracy - High Tech against technology theft” informs about possibilities to effectively protect products—from single components all the way to complete machines.
The video can be viewed on the VDMA website (to the video).
The North American market shows a continuous dynamic growth in demand for security solutions for product and document protection. To provide competent consulting and first class service for existing and potential local customers, Schreiner ProSecure has reinforced its US expert team in Blauvelt/NY. With long term experience in implementing anti-counterfeiting solutions, Huda Midani supports customers in various industries.
Contact:
Huda Midani
Email: midani@schreiner-prosecure.com
Phone: +1 484-769-5347
To effectively counter the growing threat posed by counterfeit drugs, pharmaceutical manufacturers increasingly bank on anti-counterfeiting and brand protection solutions for pharmaceuticals. At the same time, at the initiative of the European Federation of Pharmaceutical Industries and Associations (efpia) EU legislation will create the basis for a Europe-wide standardized track & trace system for pharmaceuticals.
From June 14 to 16, 2010, the IQPC “Global Pharma Authentication” Conference will be held in Munich as a forum for exchange of current facts and information on this topic. Experts from Schreiner MediPharm and Schreiner ProSecure, among others, will present innovative security technologies for online authentication and tamper protection at the conference.
For additional information about the event, click here:
www.authentication-pharma.com/MM
Opaque, tamper-proof and easy to process: Schreiner ProSecure’s PIN Safe label ensures secure and efficient mailing of PINs (personal identification numbers). Information on the product and its capabilities has now been summarized in a well-structured overview on our new website about PIN protection.
Visit us at www.pin-protection.de and find out how PINs securely reach your customers.
Schreiner ProSecure will showcase innovative solutions for efficient counterfeiting and tampering protection of spare parts for plant and machinery at the Hannover Fair from April 19 to 23, 2010.
In hall 17, booth D23, the specialist for security solutions will team up with partners from industry and research to present initial results of the “ProAuthent” project: Integrated Product Piracy Protection through Marking and Authentication of Critical Components in Plant and Machinery Engineering.”
At the beginning of 2010, customs authorities in Ingolstadt, Germany, confiscated more than 800 faked solar modules. An importer was planning to sell the panels from China as products made by a renowed manufacturer. The counterfeit goods have an estimated value of 270,000 euros.
For manufacturers of branded solar products which are in high demand counterfeit-proof product marking is becoming increasingly important. Schreiner Group offers a wide range of marking and functional labels which have been tested for use with solar modules and provide definite proof of authenticity throughout the product’s lifecycle.
The LogSeal sample label by Schreiner ProSecure is an example of effective product and brand protection. The use of overt and covert security features represents a major hurdle for counterfeiters. Distributors/dealers, customs officials and consumers can check a 15-digit code that is stored in a Data Matrix code on the label on the internet and thus ensure that the product is an original. After the query the 15-digit code will be blocked for any further queries because it is issued only once.
In addition, detachable label parts for documentation purposes may be integrated into the seal. These documentation labels can be transferred to delivery notes, for example. The documentation labels bear the same code and security features as the seal that is firmly attached to the product. This enables authentication of the panels also from the office at any time.
Further information:
>> Product protection
>> Logistic seal
>> KeySecure online-authentification
A safe and sound combination: at CeBIT 2010, Schreiner ProSecure will team up with Otto Künnecke GmbH to showcase innovative solutions for secure mailing of personal identification numbers (PINs) from March 2 to 6, in hall 11, booth G55.
The solutions presented offer maximum security and very good readability and can be used on standard paper. The system solution by the specialists from Schreiner ProSecure and Otto Künnecke GmbH features an intelligent combination of tamper-proof PIN protection and modern PIN mailer processing at high levels of security and favorable costs.
In close collaboration with Hypercom, the world’s leading provider of card readers, Schreiner ProSecure has developed a seal for readers in doctors’ offices that doesn’t give data thieves the slightest chance. Any attempt to open the reader or tamper with the seal will be reliably indicated. The seal has been tested and awarded a particularly high security rating by the German Federal Agency for Security in Information Technology (BSI).
>> More information: Hypercom Housing Seal
>> General Informationen: Housing Seals
Schreiner ProSecure will present highlights from various sectors at the leading trade fair for document protection. The following solutions will be showcased among others:
The trade fair will be held at the Queen Elizabeth II Conference Center in London on February 9 and 10. The specialists from Schreiner ProSecure look forward to a vigorous exchange of information at booth no. H21.
PIN mailers sent to NAB’s customers are combined with a perfect brand presentation: A PIN protection label specially produced by Schreiner ProSecure for NAB not only provides reliable protection for the printed PIN underneath, but also draws attention to the bank’s logo featured in the label’s hologram.
More information: PIN protection solutions
The extensive website on the new Copy Detection Technology is now online. Visit the new site and find information on the technology, authentication and various application examples.
BitSecure is a forward-thinking element of comprehensive product and document security. BitSecure is the name of the new anti-counterfeiting technology for products and documents. High security, easy readability using standard scanners and cost-efficient implementation are hallmarks of the Copy Detection Technology. In combination with other security features such as holograms or customized color shifting effects BitSecure is a forward-thinking element of comprehensive product and document security.
To website: www.schreiner-bitsecure.com
In 2009, Schreiner ProSecure will again be present at CARTES, the world’s leading trade fair for smart card manufacturers, in Paris, France, from November 17 to 19.
In addition to proven solutions for PIN protection on cards and forms, Schreiner ProSecure will showcase a number of special highlights:
You will find Schreiner ProSecure in hall 3, booth H 092.
Further information:
Cartes website
((rfid))-ePayment-Label
The European Commission today adopted a Communication on enhancing the enforcement of intellectual property rights in the internal market. Complementing legislation, the actions in this Communication aim to:
PIN Safe provides tamper-proof sealing for PINs. Up to now, there is no known optical, chemical or physical method available to spy out the PIN without the attempt being noticed.
In collaboration with Otto Künnecke Mail Processing Systems and the DSV Group, a turnkey system solution was developed that is used across Germany for mutual savings banks.
More information: PIN Safe for DSV Group
To prevent attacks against critical data, the specialists Schreiner ProSecure and Schreiner VarioLight print extremely thin conductor paths on a film. Like a protective wrap, this security film can then be affixed around micro-chips or storage media.
An attempt to tamper with equipment that is protected by the wrap activates the protective mechanism: In case of short circuits or interruptions, for instance, all security-relevant data is immediately erased.
More information: SenseSecure – the tampering sensor
According to the Nano.de-Report 2009 "Status Quo der Nanotechnologie in Deutschland" (“Status Quo of Nano Technology in Germany) by the Federal Ministry of Research and Development, document security and product protection are viewed as focal areas for use of nano technologies. They include, for example, fluorescent materials or the use of DNA for authentication.
Schreiner ProSecure qualifies and validates currently available security technologies and develops customized solutions based on specific needs. For a customer from the pharmaceutical industry, for instance, DNA is printed and used as an authenticity feature.
Schreiner ProSecure was an exhibitor at the International Security Printers’ Conference & Suppliers Exhibition in Stockholm and demonstrated its industry expertise.
From May 13 to 15, 2009, Schreiner ProSecure showcased self-adhesive solutions for document and asset protection such as toll fee stickers (vignettes) for windshields and seals. The ePayment label for electronic payment systems was one of the focal products attracting visitors’ interest.
Schreiner ProSecure’s assessment of its three-day trade fair presence was positive: The representatives of the division had successfully fostered contacts with industry representatives and underscored their role as a security printing house at an international level.
((rfid))-ePayment labels accelerate the payment process and provide an all-new purchasing experience.
The labels are applied to commonly used items like cell/mobile phones. To pay, the customer simply positions the device with the label close to the POS/checkout terminal. The payment transaction is performed in a contactless and anonymous process by wireless data transmission, without signatures or use of PINs. The amount of the purchase is debited directly from the value stored on the chip of the label. An acoustic and visual signal confirms completion of the payment transaction. The ((rfid))-ePayment label was developed by Schreiner LogiData and is jointly marketed with Schreiner ProSecure.
More information:: ePayment-Label
“BitSecure” is the new digital security feature for proof of authenticity requirements in Schreiner ProSecure’s portfolio. The German specialist for self-adhesive marking solutions for product and document protection acquired the copy detection technology invented by MediaSec Technologies GmbH from the worldwide Thomson Group as of March 16, 2009. The strategic acquisition supports the company’s systematic expansion of its market position as a provider of product and document protection solutions.